See all 4 photos

Rich Soloma Built Corvette GT-1 Race Car With AEC NASCAR SB2 Motor

Race cars • Historic Race Car • CHEVROLET • For sale • United States of America • Grand rapids, mi

$49 995
Published on 11/01/2026 at 16:37
Details

Corvette SCCA GT-1 Race Car For Sale. Built by CA Lockheed aircraft engineer Rich Soloma, former Exsys Eppinger team car. GM engineer John Heinricy driven, with the previous owner. Engine was purchased by Exsys Eppinger and gone through at AEC, in Wisconsin. Sequential five speed transmission was purchased new, from Ferrara, in FL. (That's $40,000 or more alone, spent right there for the engine/transmission upgrade). Completely gone through, extensive improvements, over the course of the last 3 years, with minimal track time. SCCA log book, and extensive documentation included. Great car for track days, club competition, or vintage events.

Advanced Composite C5 Body

Fresh Chevy SB2 Motor, by Advanced Engine Concepts, Green Lake, WI. "Orange engine" to them. Good leak down numbers. Run very little.

Bryant crank, Carillo rods, SB2.2 heads, 4.189” bore, 3.25” stroke, Holley carb

Sanez five speed sequential gear box, legal set back, forward mounted (purchased new by the previous owner, very little use.

Cantilevered suspension, front and rear. Soloma designed. Very soft springs.

All new, complete Tilton Trans Am four-disc clutch set up, throwout bearing, and starter

Upgraded Penske Canister Shocks (2 way adjustable) by Performance Shocks, Sonoma, CA

Dedon Independent rear suspension, high roll center, Ford 9” rear end (3.89 ratio) with built in oil pump (Not Trans Am legal).

Kirkey 17” wide seat

Schroth belts new in 2024

Rear mounted driver camera

ATL 22 gallon fuel cell

Horizontally mounted C&R radiator

BBS wheels with Hoosier tires in good shape

Roush Racing (Patterson) drive shaft

New 1350 U joints

Blade style adjustable rear sway bar

AIM Solo lap time indicator

On Board DL1 Data logger (Race-technology.com)

Dash 4 Pro driver display (Race-technology.com)

Autometer analog tach with remote shift light

Analog gauges for water temp. transmission fluid temp.

Brake balance gauges

Sanez gear position indicator

LED indicator light for low oil pressure

Helmet, rear brake, trans oil cooler fans

Wired for radios (not included)

New Detroit Speed Engineering narrow rack and pinion power steering

Alcon front brakes, Coleman rotors

2800 pounds with fluids, no driver.

Serious inquiries only please. Cars engine runs great, most all of the necessary work has been done.

Soloma Corvette GT-1 Modifications & Improvements

2021

Installed New Power Steering Cooler

Installed New Radiator Cooling Fan

Installed Two (2) New Penske 8200 Front Shocks

Installed New Helmet Blower

Installed New Seat Belts

Installed New Window Net

Resealed Eight Wheels

Repaired Non-Working Brake Lights

Added Rain Lights

Installed New Kirkey Seat, Cover, And Leg Pads

Changed All Fluids

Repaired Wheel Wells

Repaired Cracked And Damaged Body Work

Repaired Stripped Cap Screw In Cylinder Head

Set Valves

Replaced Leaky Fuel Line

Sent Tilton Clutch Housing Out For Hard Anodized

Installed All New Tilton Clutch Assembly Bearings, And Seal

Installed New Transmission Drain Plug, With Safety Wiring

Installed New Gold Heat Reflective Material In Engine Compartment

Repaired Damaged Front Splitter

Installed Terminal Insulators On Starer, Alternator, And Interior


John Heinricy GT1 Corvette For Sale Michigan

John Heinricy GT1 Corvette For Sale MichiganRich Soloma Corvette GT1 SCCA Race Car For Sale
Price: $49,995.00
Item Number: GT1-01
Manufacturer Part No: GT1-01
Quantity:
1
add to cart
Email this page to a friend
Corvette SCCA GT-1 Race Car For Sale. Built by CA Lockheed aircraft engineer Rich Soloma, former Exsys Eppinger team car. GM engineer John Heinricy driven, with the previous owner. Engine was purchased by Exsys Eppinger and gone through at AEC, in Wisconsin. Sequential five speed transmission was purchased new, from Ferrara, in FL. (That's $40,000 or more alone, spent right there for the engine/transmission upgrade). Completely gone through, extensive improvements, over the course of the last 3 years, with minimal track time. SCCA log book, and extensive documentation included. Great car for track days, club competition, or vintage events.

Advanced Composite C5 Body

Fresh Chevy SB2 Motor, by Advanced Engine Concepts, Green Lake, WI. "Orange engine" to them. Good leak down numbers. Run very little.

Bryant crank, Carillo rods, SB2.2 heads, 4.189” bore, 3.25” stroke, Holley carb

Sanez five speed sequential gear box, legal set back, forward mounted (purchased new by the previous owner, very little use.

Cantilevered suspension, front and rear. Soloma designed. Very soft springs.

All new, complete Tilton Trans Am four-disc clutch set up, throwout bearing, and starter

Upgraded Penske Canister Shocks (2 way adjustable) by Performance Shocks, Sonoma, CA

Dedon Independent rear suspension, high roll center, Ford 9” rear end (3.89 ratio) with built in oil pump (Not Trans Am legal).

Kirkey 17” wide seat

Schroth belts new in 2024

Rear mounted driver camera

ATL 22 gallon fuel cell

Horizontally mounted C&R radiator

BBS wheels with Hoosier tires in good shape

Roush Racing (Patterson) drive shaft

New 1350 U joints

Blade style adjustable rear sway bar

AIM Solo lap time indicator

On Board DL1 Data logger (Race-technology.com)

Dash 4 Pro driver display (Race-technology.com)

Autometer analog tach with remote shift light

Analog gauges for water temp. transmission fluid temp.

Brake balance gauges

Sanez gear position indicator

LED indicator light for low oil pressure

Helmet, rear brake, trans oil cooler fans

Wired for radios (not included)

New Detroit Speed Engineering narrow rack and pinion power steering

Alcon front brakes, Coleman rotors

2800 pounds with fluids, no driver.

Serious inquiries only please. Cars engine runs great, most all of the necessary work has been done.


Soloma Corvette GT-1 Modifications & Improvements

2021

Installed New Power Steering Cooler

Installed New Radiator Cooling Fan

Installed Two (2) New Penske 8200 Front Shocks

Installed New Helmet Blower

Installed New Seat Belts

Installed New Window Net

Resealed Eight Wheels

Repaired Non-Working Brake Lights

Added Rain Lights

Installed New Kirkey Seat, Cover, And Leg Pads

Changed All Fluids

Repaired Wheel Wells

Repaired Cracked And Damaged Body Work

Repaired Stripped Cap Screw In Cylinder Head

Set Valves

Replaced Leaky Fuel Line

Sent Tilton Clutch Housing Out For Hard Anodized

Installed All New Tilton Clutch Assembly Bearings, And Seal

Installed New Transmission Drain Plug, With Safety Wiring

Installed New Gold Heat Reflective Material In Engine Compartment

Repaired Damaged Front Splitter

Installed Terminal Insulators On Starer, Alternator, And Interior

Installed New MSD Distributor Cap, Rotor, Moroso Plug Wires, And Spark Plugs

Installed MSD Coil Wire Hold Down

Installed Rear Brake Ducting

Installed Radiator Over Flow Tank, Per SCCA

Installed Brake Bias Gauges

Installed Quick Car Control Panel



2022

Installed New Penske 8200 Rear Shocks

Installed New Tilton 5.5” Clutch

Rebuilt Tilton Throw Out Bearing Assembly

Relocated Water Temp. Sending Unit

Installed SCCA Required Fuel Drain Port

Repaired Damaged Side Door Panels

Installed Wear Pads On Door Side Panels

Installed Thermal Fuel Line Covers

Installed AMB In Car Lap Timer

Installed New Fuel Line Vapor Sleeve

Thermo Wrapped Exhaust Headers

Changed Transmission Oil Filter

2023

Installed new Detroit Speed Engineering rack and pinion system

Balanced brake system, by changing master cylinder sizes

Installed new LED oil pressure warning light

2024

Front brake calipers rebuilt by Hoerr Racing

5" Front Brake Duct Hoses Replaced

New brake rotor on right front side

Ne RF Coleman brake rotor

Repacked both front wheel bearings


Spares Package Included:

Four extra (4) BBS wheels (front & rear), with new stickered and mounted Hoosier tires (slicks).

Sunoco Race Gas, 112 octane, 10 gallons in cans

Box of spare gears for the Sanez transmission

Two race fuel jugs

Shock compression tool, custom made for the car

Four jack stands, custom made for the car

Extra side lift bars, for jacking up the car

Four extra sway bars

Extra set of new Hawk brake pads

MORE INFO AND PHOTOS AT: www.gearheadzproducts.com

arrow left icon
Rich Soloma Built Corvette GT-1 Race Car With AEC NASCAR SB2 Motor
Rich Soloma Built Corvette GT-1 Race Car With AEC NASCAR SB2 Motor
Rich Soloma Built Corvette GT-1 Race Car With AEC NASCAR SB2 Motor
arrow right icon
Report this ad

Similar ads

arrow up